Analisis Tingkat Risiko Cedera Pekerja Menggunakan Metode Rapid Entire Body Assisment Bagian Warehouse Pada PT Piranti
Keywords:
Ergonomics, Musculoskeletal disorders, NBM, REBAAbstract
This study was carried out to assess the risk of injuries when moving materials in PT warehouses. The purpose of this study is to identify illnesses reported in warehouse operations and assess the risk of worker infection. This study uses the Nordic Body Map (NBM) technique to identify pain disorders in workers and the Rapid Whole Body Assessment (REBA) technique to assess the level of postural risk. The study showed that eight people complained of pain in the right shoulder, right knee, left leg and right leg. In the NBM questionnaire, the average score for musculoskeletal disease risk is 64, placing it in the intermediate category that requires further improvement. At the same time, a REBA score of 12 is a very high risk and currently requires improvement. Based on this study, Warehouse workers were found to be at increased risk of developing musculoskeletal (MS) injuries. Therefore, it is necessary to improve or augment equipment such as forklifts and conveyor belts to reduce injury from musculoskeletal disorders (MSD).
References
E. J. Firdaus, K. Kusnadi, and P. A. Sujarno, “Penilaian Postur Tubuh Pekerja Dan Perbaikan Sistem Kerja Dengan Metode Rula Dan Reba Pada Pt. Sharp Electronics Indonesia,” J. Serambi Eng., vol. 8, no. 2, pp. 5170–5181, 2023, doi: 10.32672/jse.v8i2.5509.
A. Zulfahmi, I. Sujana, and Y. E. Prawatya, “Rancang Bangun Alat Adon Bumbu Pecel Menggunakan Metode Nordic Body Map (NBM) dengan Pendekatan Antropometri,” J. Tek. Ind. UNTAN, vol. 4, no. 2, pp. 30–36, 2020.
B. K. Kurniawan et al., “Penerapan Ergonomi Dalam Perancangan Furnitur Mata Kuliah DF IV Desain,” J. ATRAT, vol. 6, pp. 42–48, 2018.
M. B. Anthony, “Analisis Postur Pekerja Pengelasan Di CV. XYZ dengan Metode Rapid Entire Body Assessment (REBA),” JATI UNIK J. Ilm. Tek. dan Manaj. Ind., vol. 3, no. 2, pp. 128–139, 2020, doi: 10.30737/jatiunik.v3i2.844.
D. Mayasari and F. Saftarina, “Ergonomi Sebagai Upaya Pencegahan Musculoskletal Disorders pada Pekerja,” J. Kedokt. Univ. Lampung, vol. 1, no. 2, pp. 369–379, 2016, [Online]. Available: https://juke.kedokteran.unila.ac.id/index.php/JK/article/download/1643/1601
U. Indonesia and U. Indonesia, “sendiri berkembang di Eropa sedangkan di Amerika berkembang dengan istilah “,” no. 1995, 2009.
I. Kurniawati, “Tinjauan Faktor-Faktor Risiko Ergonomi,” J. Univ. Indones., vol. 6, no. 1, p. 108, 2009.
D. M. Latifah, GAMBARAN KELUHAN MUSKULOSKELETAL DISORDER ( MSDS ) PADA MAHASISWA PENATA ANESTESI ALIH JENJANG KEPERAWATAN ANESTESIOLOGI ITEKES BALI GAMBARAN KELUHAN MUSKULOSKELETAL DISORDER ( MSDS ) PADA MAHASISWA PENATA ANESTESI ALIH. 2021.
A. F. D. Hartono and H. Soewardi, “ANALISIS FAKTOR-FAKTOR RESIKO PENYEBAB MUSCULOSKELETAL DISORDERS DAN STRES KERJA ( Studi Kasus di PLN PLTGU Cilegon ) A . Musculoskeletal Disorders ( MSDs ) oleh karena otot menerima beban statis secara berulang dan terus menerus dalam jangka akibat pembe,” Univ. Islam Indones., pp. 1–13, 2018.
S. F. Zahra and H. Prastawa, “Analisis Keluhan Muskuloslelatal dengan Menggunakan Metode Nordic Body Map,” Ind. Eng. Online J., vol. 12, no. 2, pp. 1–9, 2023.
M. A. Prawira, N. Putu, N. Yanti, E. Kurniawan, and P. W. Artha, “Faktor Yang Berhubungan Terhadap Keluhan Muskuloskeletal Pada Mahasiswa Universitas Udayana Tahun 2016,” Ind. Hyg. Occup. Heal., vol. 1, no. 2, pp. 1–18, 2017, [Online]. Available: https://core.ac.uk/download/pdf/235573652.pdf
P. A. Pratiwi, D. Widyaningrum, and M. Jufriyanto, “ANALISIS POSTUR KERJA MENGGUNAKAN METODE REBA UNTUK MENGURANGI RISIKO MUSCULOSKELETAL DISORDER (MSDs),” PROFISIENSI J. Progr. Stud. Tek. Ind., vol. 9, no. 2, pp. 205–214, 2021, doi: 10.33373/profis.v9i2.3415.
N. F. Dewi, “Identifikasi Risiko Ergonomi dengan Metode Nordic Body Map,” J. Sos. Hum. Terap., vol. 2, no. 2, pp. 125–134, 2020.
A. Reba and P. Pekerja, “Analisis tingkat risiko cidera pekerja menggunakan metode rapid entire body assessment (reba) pada pekerja jahit (studi kasus : cv. uni batik),” 2022.
N. Rahdiana, “Identifikasi Risiko Ergonomi Operator Mesin Potong Guillotine Dengan Metode Nordic Body Map (Studi Kasus Di Pt. Xzy),” Ind. Xplore, vol. 2, no. 1, pp. 1–12, 2018, doi: 10.36805/teknikindustri.v2i1.185.
A. Destha Joanda and B. Suhardi, “Analisis Postur Kerja dengan Metode REBA untuk Mengurangi Resiko Cedera pada Operator Mesin Binding di PT. Solo Murni Boyolali,” Semin. dan Konf. Nas. IDEC, pp. 72–76, 2017.
P. Yuliarty and S. Soegiyanto, “Analisis Tingkat Risiko Ergonomi Pada Poin Kerja Chassis and Tire Dengan Metode Rapid Entire Body Assessment (REBA) Di Departemen Assembly Frame PT X (Industri Perakitan Mobil),” Semin. Nas. Sains dan Teknol., no. November, pp. 1–11, 2017.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 R.M. Sugengriadi, Deni A Taufik, Siti Munisah
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
