Prototype Mesin Tekuk Plat Dengan Sistem Pneumatic Untuk Praktik Pembelajaran Sekolah Menegah Kejuruan
Keywords:
Manufactur, pneumatic, mekanikal, elektrikalAbstract
Developments in the industrial world are currently growing so rapidly. However, learning at the vocational high school stage still lacks visual aids that support student learning. The production units in workshops at schools still lack tools to support production, especially for the plate bending process. From the problems above, the electro-pneumatic control system is very suitable for increasing production and can reduce costs. In designing an electro-pneumatic system, use the Festo FluidSIM Pneumatic software to design a circuit system and simulate it before applying it to machine construction. And the results show the air flow and electricity acting on each pneumatic valve used to drive the double acting cylinder.
References
Wahyu Pram, “kompresor,” 2012.
Rizky Alviyanto, “LAPORAN KERJA PRAKTEK (KP) ‘PNEUMATIK,’” 2021.
A. Panjaitan et al., “RANCANG BANGUN DAN SIMULASI SISTEM PNEUMATIK DENGAN 1 SILINDER SEBAGAI MEDIA PEMBELAJARAN,” 2021.
S. Ir. Djennoedin, “BAB II DASAR TEORI.”
M. Saputra, M. Prodi Sarjana Terapan Teknologi Rekayasa Manufaktur, and D. Jurusan Teknik Mesin Politeknik Negeri Lhokseumawe, “RANCANG BANGUN SISTEM ELEKTRO PNEUMATIK PADA MESIN PRESS BRIKET”.
Wahyu Pram, “Sistem Pneumatik,” 2012.
P. Sistem et al., “The Design of Plat Bending System Using Electro Pneumatic Based on PLC Omron CP1E,” pp. 98–105, 2022.
A. A. Syukur, A. Purnomo, A. Sai, J. H. Teknik Mesin Politeknik Negeri Semarang Jl Soedarto, K. Semarang, and J. Tengah, “REKAYASA MESIN PENEKAN LENSA SEMI AUTOMATIC DENGAN PENGGERAK PNEUMATIK KONTROL ARDUINO PADA PROSES ASSEMBLY HEAD LAMP TIPE 045.”
A. Elbani, “Kajian Unjuk Kerja Sistem Pneumatic Hydrolic Pada Komponen Katup Kontrol (Control Valve),” 2010.
M. Yanis and dan W. Ricky, “PERANCANGAN DAN PEMBUATAN MESIN BENDING DAN NOTCHING,” 2021.
A. , & R. R. Khalid, “Katup dan Aktuator Pneumatik,” 2016.
I. Wisjnu P.Marsis, “PERANCANGAN MESIN BENDING DENGAN MEMANFAATKAN SITEM DONGKRAK HIDROLIK SEDERHANA.”
S. T. Darto, “PERENCANAAN DAN SIMULASI SISTEM PNEUMATIK PADA MESIN PRES BRIKET BLOTHONG BERBANTUAN PERANGKAT LUNAK.”
haruto Tahara, “makalah-kompresor_2,” 2006.
A. Wisnujati and M. Yusuf, “Rancang Bangun dan Uji Kinerja Mesin Bead Roller untuk Perbaikan Bodi Kendaraan,” Rekayasa, vol. 14, no. 1, pp. 114–120, Mar. 2021, doi: 10.21107/rekayasa.v14i1.10092.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Dini Oktavitasari, Hari Witjahjo, Kresna Baskoro
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
