Perbaikan Untuk Menurunkan Jumlah Kerusakan Alat Produksi Dengan Metode FMEA di PT. Piranti Indonesia
Keywords:
Jig Board, Component Defect, FMEA, Pareto Diagram, Performing RepairsAbstract
One of the equipment that was damaged was the jig board (fast moving), experiencing component damage broken plastic fork, dirty jig board, rusty iron fork, torn plastic jig board, fragile and perforated board. This study aims to reduce the number of cases of equipment damage using Pareto diagrams, identify defect factors that cause damage to the equipment with the FMEA method, and conduct training on the equipment through fishbone diagrams. The method used in this study is the FMEA method. The results of the Pareto diagram study determine the order of component damage on the equipment: 223 broken plastic forks with a cumulative 38.25%, 130 dirty jig boards (60.55%), 116 rusty iron forks (80.45%), 71 torn plastic jig boards (92.63%), fragile and perforated boards 43 pcs (100%). The FMEA method obtained RPN assessments on dirty jig board components, broken plastic forks, and rusty iron forks. Fishbone diagrams were applied to solve problems and propose improvements to the causes of the damage experienced.
References
[1] N. C. Igbokwe and H. C. Godwin, “Maintenance Performance Evaluation and Downtime Analysis of Manufacturing Equipment in a Food Manufacturing Company,” J. Eng. Res. Reports, vol. 20, no. 11, pp. 100–107, 2021, doi: 10.9734/jerr/2021/v20i1117413.
[2] H. Sriwindiarto, “Analisis Perancangan Jig Machining Base Crankshaft Pulley Puller pada Mesin CNC Milling dengan Metode FMEA dan FTA di PT. XYZ,” G-Tech J. Teknol. Terap., vol. 7, no. 4, pp. 1653–1662, 2023, doi: 10.33379/gtech.v7i4.3314.
[3] A. Riszal, E. Yohanes, A. Y. E. Risano, F. Ibrahim, and H. Supriadi, “Application of Failure Mode and Effect Analysis (FMEA) and Ishikawa Diagram In Determining The Damage Aspects and Maintenance Plan of Screw Feeder of Steam Power Plant Company,” J. Appl. Sci. Eng. Technol., vol. 2, no. 2, pp. 33–42, 2022.
[4] T. Alda, A. Sukma Ompusunggu, A. Shalihin, C. Elsanna Revadi, F. Ramadhani Putri Nasution, and N. Cevania Purba, “Analisis Pengendalian Kualitas Produk Tiang Pancang di PT. X dengan Menggunakan Metode Failure Mode and Effect Analysis (FMEA),” J. Manaj. Rekayasa dan Inov. Bisnis, vol. 2, no. 2, pp. 61–69, 2024, doi: 10.62375/jmrib.v2i2.284.
[5] M. RAFI, “Analisis Risiko Kegagalan Pada Proses Pengantongan Urea 50Kg Dengan Metode Failure Mode and Effect Analysis (Fmea) Di Pt. Pupuk Kaltim,” pp. 1–71, 2023.
[6] A. Hakim, “Analisis Penyebab Defect Kabnet Fall Board Menggunakan Pendekatan Analytical Hierarchy Process (AHP) Dan Failure Mode Effect Analysis (FMEA),” ahqamul hakim, vol. 87, no. 1,2, pp. 149–200, 2023, [Online]. Available: https://repositorio.ufsc.br/xmlui/bitstream/handle/123456789/167638/341506.pdf?sequence=1&isAllowed=y%0Ahttps://repositorio.ufsm.br/bitstream/handle/1/8314/LOEBLEIN%2C LUCINEIA CARLA.pdf?sequence=1&isAllowed=y%0Ahttps://antigo.mdr.gov.br/saneamento/proees
[7] A. Walansari, J. Juhadi, and S. Muslim, “Pengelolaan Proses Produksi Dan Pengendalian Mutu Wiring Harness Dalam Pandangan Syariah,” J. Ekon. Syariah Indones., vol. 2, no. 1, pp. 66–74, 2023, doi: 10.57171/jesi.v2i1.69.
[8] D. Y. C. Nissa and . I., “Analisis Gangguan Penyulang Dengan Menggunakan Diagram Pareto dan Diagram Fishbone di UP3 di Bojonegoro,” J. Sains dan Teknol., vol. 4, no. 2, pp. 134–139, 2024, doi: 10.47233/jsit.v4i2.1648.
[9] M. B. Anthony, “Analisis Penyebab Kerusakan Hot Rooler Table dengan Menggunakan Metode Failure Mode And Effect Analysis (FMEA),” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 4, no. 1, p. 1, 2018, doi: 10.30656/intech.v4i1.851.
[10] A. Surya, S. Agung, and P. Charles, “Penerapan Metode FMEA (Failure Mode And Effect Analysis) Untuk Kualifikasi Dan Pencegahan Resiko Akibat Terjadinya Lean Waste,” J. Online Poros Tek. Mesin, vol. 6, no. 1, pp. 45–57, 2017, [Online]. Available: https://ejournal.unsrat.ac.id/index.php/poros/article/download/14864/14430.
[11] Y. Hisprastin and I. Musfiroh, “Ishikawa Diagram dan Failure Mode Effect Analysis (FMEA) sebagai Metode yang Sering Digunakan dalam Manajemen Risiko Mutu di Industri,” Maj. Farmasetika, vol. 6, no. 1, p. 1, 2020, doi: 10.24198/mfarmasetika.v6i1.27106.
[12] A. Syarifudin and J. T. Putra, “Analisa Risiko Kegagalan Komponen pada Excavator Komatsu 150LC dengan Metode FTA DAN FMEA DI PT. XY,” J. InTent, vol. 4, no. 2, pp. 1–10, 2021.
[13] N. Siregar and S. Munthe, “Analisa Perawatan Mesin Digester dengan Metode Reliabity Centered Maintenance pada PTPN II Pagar Merbau,” J. Ind. Manuf. Eng., vol. 3, no. 2, pp. 87–94, 2019, [Online]. Available: http://ojs.uma.ac.id/index.php/jime
[14] M. Ilham et al., “uneversitas semarang,” http://repository.unimar-amni.ac.id/3674/, vol. 7, no. 5, pp. 1–2, 2021, [Online]. Available: http://content.ebscohost.com/ContentServer.asp?EbscoContent=dGJyMNLe80Sep7Q4y9f3OLCmr1Gep7JSsKy4Sa6WxWXS&ContentCustomer=dGJyMPGptk%2B3rLJNuePfgeyx43zx1%2B6B&T=P&P=AN&S=R&D=buh&K=134748798%0Ahttp://amg.um.dk/~/media/amg/Documents/Policies and Strategies/S
[15] M. A. Pradaka and J. Aidil SZS, “Analisis Total Productive Maintenance Menggunakan Metode OEE dan FMEA pada Pabrik Phosporic Acid PT Petrokimia Gresik,” J. Tek. Ind., vol. 11, no. 3, pp. 280–289, 2021, doi: 10.25105/jti.v11i3.13087.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Deni Ahmad Taufik, Raden Mohamad Sugengriadi, Saeful Akbar
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
