Usulan Perbaikan Postur Kerja Pada Proses Produksi Packing Menggunakan Metode REBA (Rappid Entire Body Assesment)
Keywords:
Ergonomics, Musculosketal Disorders (MSDs), Nordic Body Map (NBM), Rapid Upper Limb Assessment, Proposal for Improvement of Sitting Posture.Abstract
Work posture refers to the position of the body while performing work activities, which is closely related to the design of the work area. Various conditions of non-ergonomic workstations can lead to unnatural working postures such as squatting, slouching, and others. Therefore, improvement proposals must be made to minimize worker complaints. The Nordic Body Map (NBM) is used to identify areas of the body experiencing discomfort, while the Rapid Entire Body Assessment (REBA) method is applied to determine the risk level and necessary actions related to injury-causing complaints. The study results showed a REBA score of 9, indicating a high level of risk and the need for immediate corrective action. After implementing a proposed improvement to the packing operator’s working posture using CATIA software, the REBA score was reduced to 4, indicating a medium risk level, where corrective action may be needed. This study aims to apply proposed improvements to workers' body postures to prevent Musculoskeletal Disorders (MSDs) and to ensure that work productivity is not affected.Top of FormBottom of Form
References
[1] M. B. Anthony, “Analisis Postur Pekerja Pengelasan Di CV. XYZ dengan Metode Rapid Entire Body Assessment (REBA),” JATI UNIK J. Ilm. Tek. dan Manaj. Ind., vol. 3, no. 2, pp. 128–139, 2020, doi: 10.30737/jatiunik.v3i2.844.
[2] I. U. Airlangga et al., “DI PT INTERBAT ANALISIS PENILAIAN POSTUR KERJA MANUAL HANDLING MENGGUNAKAN REBA ( RAPID ENTIRE BODY ASSESSMENT ) DAN NBM ( NORDIC BODY MAP ) PADA PEKERJA PT INTERBAT Oleh : SANI EKA WIRANTI,” 2023.
[3] B. Aprianto, A. F. Hidayatulloh, F. N. Zuchri, I. Seviana, and R. Amalia, “FAKTOR RISIKO PENYEBAB MUSCULOSKELETAL DISORDERS (MSDs) PADA PEKERJA: A SYSTEMATIC REVIEW,” J. Kesehat. Tambusai, vol. 2, no. 2, pp. 16–25, 2021, doi: 10.31004/jkt.v2i2.1767.
[4] D. M. Latifah, Gambaran Keluhan Muskuloskeletal Disorder ( Msds ) Pada Mahasiswa Penata Anestesi Alih Jenjang Keperawatan Anestesiologi Itekes Bali Gambaran Keluhan Muskuloskeletal Disorder ( Msds ) Pada Mahasiswa Penata Anestesi Alih. 2021.
[5] P. A. Pratiwi, D. Widyaningrum, and M. Jufriyanto, “ANALISIS POSTUR KERJA MENGGUNAKAN METODE REBA UNTUK MENGURANGI RISIKO MUSCULOSKELETAL DISORDER (MSDs),” PROFISIENSI J. Progr. Stud. Tek. Ind., vol. 9, no. 2, pp. 205–214, 2021, doi: 10.33373/profis.v9i2.3415.
[6] N. F. Dewi, “IDENTIFIKASI RISIKO ERGONOMI DENGAN METODE NORDIC BODY Jurnal Sosial Humaniora Terapan,” osial Hum. Terap., vol. 2, no. 2, pp. 125–134, 2020, [Online]. Available: https://scholarhub.ui.ac.id/cgi/viewcontent.cgi?article=1060&context=jsht
[7] R. Rahmahwati, “Perbaikan Tingkat Risiko Musculoskeletal Disorders Berdasarkan Pendekatan Nordic Body Map dan Rapid Upper Limb Assessment Pada Hasil Rancang Bangun Mesin Roasting Kopi Digital Otomatis,” J. Rekayasa Sist. Ind., vol. 10, no. 2, pp. 191–200, 2021, doi: 10.26593/jrsi.v10i2.4694.191-200.
[8] McAtamney & Hignett, “REBA Employee Assessment Worksheet,” Appl. Ergon., vol. 31, no. 816, pp. 201–205, 2000, [Online]. Available: http://ergo-plus.com/wp-content/uploads/REBA.pdf
[9] M. Mantra, D. Reba, and R. Alivia, “Analisis Postur Kerja Pada Bagian Packing Menggunakan,” vol. 2, no. 4, 2024.
[10] R. Haryani, A. Azmi, and S. Sirlyana, “Analisis Postur Kerja Penjahit Nur Tailor Menggunakan Metode Rappid Entire Body Assessment,” J. ARTI (Aplikasi Ranc. Tek. Ind., vol. 16, no. 2, pp. 184–191, 2021, doi: 10.52072/arti.v16i2.263.
[11] R. Laili, “Ergonomi sebagai Upaya Pencegahan Gangguan Musculoskeletal pada Perawat,” Browne, p. 3, 2020.
[12] E. Bambang and T. Atmojo, “ANALISIS NORDIC BODY MAP TERHADAP PROSES PEKERJAAN,” vol. 3, no. 1, pp. 30–33, 2020.
[13] F. A. N. Akh. Sokhibi, “Analisis Postur Kerja Karyawan Pemindahan Beam Benang Dengan Metode Reba Pada Divisi Persiapan Pt Sukuntex,” J. Ind. Eng. Technol., vol. 2, no. 1, pp. 85–92, 2022, doi: 10.24176/jointtech.v2i1.7434.
[14] M. A. Yaqin, A. W. Rizqi, and H. Hidayat, “Analisis Postur Tubuh Pekerja Dengan Menggunakan Metode Rapid Upper Limb Assessment (Studi Kasus : PT. Ravana Jaya),” J. Serambi Eng., vol. 7, no. 4, 2022, doi: 10.32672/jse.v7i4.4867.
[15] E. Budiarti et al., “Jurnal Kesehatan Gigi,” vol. 1, no. 2020, pp. 37–42, 2021.
[16] S. F. Zahra and H. 2023 Prastawa, “ANALISIS KELUHAN MUSKULOSKELETAL MENGGUNAKAN METODE NORDIC BODY MAP ( Studi Kasus : Pekerja Area Muat PT Charoen Pokphand Indonesia Semarang ),” pp. 1–9.
[17] F. Mardiyanti, “Pengukuran Risiko Kerja dan Keluhan Muskuloskeletal Pada Pekerja Pengguna Komputer,” J. Innov. Res. Knowl., vol. 1, no. 3, pp. 10–27, 2021.
[18] S. Rahmah and C. K. Herbawani, “FAKTOR RESIKO PENYEBAB KELUHAN MUSCULOSKELETAL DISORDERS ( MSDs ) PADA PEKERJA : TINJAUAN LITERATUR,” vol. 6, no. April, pp. 1–14, 2022.
[19] O. Studi, K. Tiga, H. Mutiara, H. Munawir, I. W. Jannah, and E. Setiawan, “Work Posture Analysis of Packing Process Workers Using the REBA and OWAS Method ( Case Study : Tiga Hati Mutiara , Sukoharjo ) Analisis Postur Kerja Pekerja Proses Pengepakan Menggunakan Metode,” vol. 1, no. 2, 2021.
[20] I. C. Laksmana, H. F. Satoto, F. Teknik, J. T. Industri, and M. Plumpungan, “USULAN PERBAIKAN FASILITAS KERJA PADA PRODUKSI PARUTAN KELAPA BERDASARKAN HASIL EVALUASI QEC DAN PRODUCTIVITY ANALYSIS WITH MARVIN E . MUNDEL METHOD AT,” vol. 16, no. 1, 2023.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Raden Mohamad Sugengriadi, Rifqi Jalu Pramudita, Risma Apriliani
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
