Analisa Kerusakan Pada Produksi Seat Mobil Penumpang Menggunakan Metode FMEA di PT. Adient Automotive Indonesia
Keywords:
Production defects, Manufacturing process, Vehicle seats, Productivity, FMEAAbstract
Efficiency and quality are key elements in the production process. In April 2023, PT. ADIENT AUTOMOTIVE INDONESIA discovered problems in its manufacturing procedures. These problems included missing components, folded seams, visible seams, loose or hanging threads, misaligned seams on components, stitching that was too tight (at least 3 steps), needle holes, crooked or wavy stitches, and missing stitches altogether. This study aimed to determine why defects persisted in the manufacturing process, reduce the number of defects in car seat manufacturing, and provide recommendations for improvements that would reduce defects in the company. To identify the reasons behind these problems, this study used the FMEA (Failure Mode and Effects Analysis) method, which includes tools such as the Pareto diagram, the fishbone diagram, and the FMEA itself. This study identified the main causes of defects in the car seat production process and provided recommendations for improvements using the FMEA method.
References
[1] Purba, H.H. (2008). Diagram fishbone dari Ishikawa. http://hardipurba.com/2008/09/25/diagram-fishbone-dari-ishikawa.html/
[2] Hendy Tannady. (2015). Pengendalian Kualitas. Yogyakarta: Graha Ilmu.
[3] Wicaksono, A., Dhartikasari Priyana, E., & Pandu Nugroho, Y. (2023). Analisis Pengendalian Kualitas Menggunakan Metode Failure Mode and Effects Analysis (FMEA) Pada Pompa Sentrifugal Di PT. X. Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, 9(1), 177.
https://ejournal.uin-suska.ac.id/index.php/jti/article/view/22233
[4] Sijia Afriani Zal Zadilah S. (2019). Pengendalian kualitas AMDK dengan Metode Failure Mode And Effect Analysis (FMEA) dan Fault Tree Analysis (FTA) PT. Sinar Gowa Industry. Makassar: Politeknik ATI Makassar.
[5] Novita ayu wulandari. (2018). Analisis penyebab cacat produk Butsudan dengan metode FMEA dan FTA. Makassar: Politeknik ATI Makassar.
[6] Rizky Ardiansyah. (2019). Analisis penyebab cacat produk menggunakan metode FMEA pada PT. Sinar Electronic Industry. Deli serdang; Universitas Medan Area.
[7] Mochammad Rizal Akbar, Arief Subekti, dan May Rochma Dhani. (2017). Analisis penyebab kerusakan mesin dengan metode FMEA pada mesin evaporator di pabrik gula. Sleman: Universitas Islam Indonesia.
[8] Ridho Hanif Taufiqurrahman. (2023). Analisa resiko kegagalan pemeliharaan pada mesin pengolahan briquette Dengan Metode Failure Mode Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA) di Cv. Unico Indonesia. Semarang: UNISSULA.
[9] Pandey, M., Tirayoh, V. Z., Maradesa, D., Akuntansi, J., Ekonomi, F., Ratulangi, U. S., & Bahu, K. (2024). Penerapan Metode Activity Based Management dalam Meningkatkan Efisiensi Aktivitas dan Biaya Produksi pada PT Sinar Pure Foods International Bitung Application Of Activity Based Management Method In Improving The International Bitung. 8(1), 50–59.
[10] Rahman, A., & Perdana, S. (2021). Analisis Perbaikan Kualitas Produk Carton Box di PT XYZ Dengan Metode DMAIC dan FMEA. Jurnal Optimasi Teknik Industri (JOTI), 3(1), 33–37.https://journal.lppmunindra.ac.id/index.php/JOTI/article/view/9287
[11] Ayu Putri Purwani, Eva Safariyani, dan Muhammad Primasuri Anbiya. (2024). Analisis Penyebab Produk Defect Jenis Dust di Proses Visual Inspection Menggunakan Metode Failure Mode and Effect Analysis (FMEA). Karawang; Universitas Singaperbangsa Karawang.
[12] Anastasya, A., & Yuamita, F. (2022). Pengendalian Kualitas Pada Produksi Air Minum Dalam Kemasan Botol 330 ml Menggunakan Metode Failure Mode Effect Analysis (FMEA) di PDAM Tirta Sembada. Jurnal Teknologi dan Manajemen Industri Terapan, 1(I), 15–21.
[13] Fernandi, M. R., Risqi, A. W., & Negoro, Y. P. (2022). Analisis Kualitas Produk Minyak Goreng Kemasan Standing Pouch Menggunakan Metode FMEA pada PT. KIAS. Serambi Engineering, VII(3), 3646–3657.
[14] Zendrato, R. V., Ryantama, R., Nugroho, M. A., Putri, D., Kuncoro, D., & Parningotan, S. (2022). Analisis Pengendalian Kualitas Pada Tempe Menggunakan Metode Seven Tools. IMTechno: Journal of Industrial Management and Technology, 3(2), 99–109. https://jurnal.bsi.ac.id/index.php/imtechno/article/view/1221
[15] Andriyanto, A., & Ega Anggraini Putri, Y. (2021). Analisis Penyebab Kegagalan Pengiriman Barang Project 247 Atau Jenis Sxq Pada Divisi Operation Airfreight Pt.Cipta Krida Bahari Dengan Metode Failure Mode and Effect Analysis (Fmea) Dan Fault Tree Analysis (Fta). Jurnal Logistik Bisnis, 11(1), 7–13. https://journal.universitaspahlawan.ac.id/index.php/jutin/article/view/27694
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Deni Ahmad Taufik, Raden Mohamad Sugengriadi, Ratih Kurnia Sari
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
