Perencanaan Penjadwalan Produksi Menggunakan Metode Material Requirement Planning (MRP) pada UMKM “Grafi Donat”
Keywords:
UMKM, Planning Scheduling Production, Material Requirement Planning, Forecasting, POM QMAbstract
"Grafi Donat" UMKM in Sukabumi, West Java, is a strategic business that produces quality donuts through a pre-order system on social media. However, production often faces obstacles such as overproduction, underproduction, and delays in the procurement of raw materials that hinder the fulfillment of consumer demand. This study proposes the application of the Material Requirement Planning (MRP) method to optimize production planning. The stages carried out include aggregation calculations for product unit equalization, demand forecasting using POM-QM software, preparation of production master schedule (MPS), making Bill of Materials (BOM), and implementation of MRP for raw material demand planning. The results of the study show that production planning is more structured with a production master schedule of 33 batches per week for December, and the procurement of raw materials is carried out for a period before production. This method has been proven to increase production efficiency and the ability of MSMEs to meet consumer demand optimally.
References
[1] T. Sudrartono et al., Kewirausahaan Umkm Di Era Digital. 2022.
[2] Febriani, “Analisis Perencanaan Persediaan Bahan Baku Dengan Menggunakan Metode Material Requirement Planning (studi kasus pada UMKM keripik usus cabe babe),” Ind. Inov. J. Tek. Ind., vol. 12, no. 1, pp. 12–20, 2022, doi: 10.36040/industri.v12i1.3811.
[3] W. Isnaini, “Perencanaan Produksi,” UNIPMA Press, pp. 5–24, 2020.
[4] Kulsum and A. Utami, Devara, “Kulsum (2021) USULAN PERENCANAAN PENJADWALAN PRODUKSI,” J. Ind. Serv. Vol. 4 No. 1, vol. 4, no. 1, 2021.
[5] I. Kesuma, “Penerapan Karakteristik Integrasi Dan Agregasi Pada Pt. Fadira Prima Semesta Medan,” 2020.
[6] M. V. Syahanifadhel, D. E. Basuki, B. A. Hasna, and A. Azzam, “Analisis Perencanaan Produksi Pada Produk Kemeja Pola Menggunakan Metode Forecasting Dan Master Production Schedule Untuk Penjadwalan Produksi Pada CV. Jodion Unggul Perkasa,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 9, no. 1, p. 95, 2023, doi: 10.24014/jti.v9i1.21890.
[7] A. Kahfi, B. Sumartono, and B. Arianto, “Analisis Perencanaan Bahan Baku Perakitan Lemari dengan Metode Material Requirement Planning (MRP) pada Bengkel Furniture,” J. Tek. Ind., vol. 9, no. 1, pp. 39–57, 2020.
[8] T. Tamalika, D. Maryadi, Ran. Moulita, A. Fitra, A. Malik, and I. Aziz, “Pengenalan Material Requirement Planning (MRP) Untuk Penjadwalan Produksi Di Usaha Pempek Skala Rumah Tangga,” J. Pengabdi., vol. 2, no. 1, pp. 1–8, 2024.
[9] E. Elisa, T. Tukino, and K. Handoko, “Penerapan Forecasting Methods Untuk Penjualan Produk Umkm Dengan Algoritma K-Nearest Neighbor,” J. Tek. Inf. dan Komput., vol. 5, no. 2, p. 455, 2022, doi: 10.37600/tekinkom.v5i2.629.
[10] R. H. Suwarso, S. T. Salmia, and T. Priyasmanu, “Perencanaan Kapasitas Produksi Menggunakan Metode Rough Cut Capacity Planning (RCCP) pada Home Industri Loca Nusa,” J. Mhs. Tek. Ind., vol. 4, no. 1, pp. 21–28, 2021.
[11] C. F. D. Nugraha, “Final Project Methods Analysis of Plastic Packaging Production Planning At Cv Ari Jempol Using Forecasting and Aggregate Planning Methods,” no. 31601700024, 2022.
[12] S. Agustian and H. Wibowo, “Perbandingan Metode Moving Average untuk Prediksi Hasil Produksi Kelapa Sawit,” Perbandingan Metod. Mov. Aver. untuk Prediksi Has. Produksi Kelapa Sawit, no. 1, pp. 156–162, 2021.
[13] M. Azman, Maricar, “Analisa perbandingan nilai akurasi moving average dan exponential smoothing untuk sistem peramalan pendapatan pada perusahaan XYZ,” J. Sist. dan Inform., vol. 13, no. 2, pp. 36–45, 2019.
[14] S. Monalisa, M. Afriani, F. Kurnia, and M. Hartati, “Sistem Informasi Peramalan Penjualan Dengan Menggunakan Metode Weighted Moving Average,” no. November, pp. 309–316, 2020.
[15] S. Nurhayati and A. Syafiq, “Sistem Prediksi Jumlah Produksi Baju Menggunakan Weighted Moving Average Clothing Production Amount Prediction System using Weighted Moving Average,” vol. 12, no. April, pp. 14–24, 2022.
[16] M. H. Riandi, N. T. Wiyani, and D. Arigawati, “PREDIKSI PENJUALAN MELALUI METODE WEIGHTED MOVING AVERAGE ( WMA ) PADA UMKM ‘ Nasi Bakar ’ Universitas Pancasakti Bekasi , Indonesia,” vol. 7, no. April 2023, pp. 190–205, 2024, doi: 10.30587/jre.v7i2.8459.
[17] Maslihan, “Analisis Perancangan Kebutuhan Material Pada Perusahaan Manufaktur Kertas Dengan Metode Material Requirement Planning,” Strateg. J. Tek. Ind., vol. 1, no. 2, pp. 29–38, 2019, doi: 10.37753/strategy.v1i2.406.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Raden Mohamad Sugengriadi, Rifqi Jalu Pramudita, M Zulpi Abdillah
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
