Usulan Perbaikan Keluhan Postur Tubuh Terkait Sakit Punggung Dan Pinggang Pekerja Operator Pusebox Pada Assy 3210A-K1A-N101 Di PT. Piranti Menggunakan Metode Rapid Upper Limb Assessment (RULA)
Keywords:
Nordic Body Map, Postur Kerja, Rapid Upper Limb Assessment(RULA), Software CATIA, ErgonomiAbstract
The operator of the Fuse box section of PT. Indonesian engineering devices often complain of pain due to poor working posture and repetitive movements. to find out how dangerous the working posture is. Data were collected through direct observation, interviews, filling out the Nordic Body Map questionnaire, and photo documentation from the rapid posture analysis method. The NBM results show that operators have individual scores with high risk levels, namely 71, 74, and 75, which require improvement. Meanwhile, the initial RULA analysis showed that the first activity scored 6 and 7 for the other two activities with a very high risk level, indicating that there is a very high risk that requires change. to reduce MSDs' cedara then work posture. redesigned using CATIA V5R20 software. This new working posture indicates a more ergonomic working posture and adjustable lifting loads. After the improvements were made, the RULA score dropped to 4, 3, and 2 with medium risk and low risk levels, indicating a large improvement in ergonomics.
References
[1] E. Budiarti, “HUBUNGAN ANTARA KARAKTERISTIK INDIVIDU DENGAN KELUHAN MUSKULOSKELETAL PETUGAS KESEHATAN GIGI DI PUSKESMAS KOTA TASIKMALAYA,” Jurnal Kesehatan Gigi, vol. 8, no. 1, pp. 37–42, 2021.
[2] A. Hanif, “Hubungan antara Umur dan Kebiasaan Merokok dengan Keluhan Musculoskeletal Disorders (MSDs) pada Pekerja Angkat Angkut UD Maju Makmur Kota Surabaya,” Medical Technology and Public Health Journal, vol. 4, no. 1, pp. 7–15, 2020.
[3] K. Wijaya, “Identifikasi Risiko Ergonomi dengan Metode Nordic Body Map Terhadap Pekerja Konveksi Sablon Baju,” in Seminar dan Konferensi Nasional IDEC, 2019, pp. 1– 9.
[4] W. Anggraini, dan Anda Mulya Pratama, D. Jurusan Teknik Industri, F. Sains dan Teknologi, U. SUSKA Riau, and M. Jurusan Teknik Industri, “Analisis Postur Kerja Dengan Menggunakan Metode Ovako Working Analysis System (Owas) Pada Stasiun Pengepakan Bandela Karet (Studi Kasus Di Pt. Riau Crumb Rubber Factory Pekanbaru),” 2012
[5] A. Tamala, “Pengukuran Keluhan Musculoskeletal Disorders (Msds) Pada Pekerja Pengolah Ikan Menggunakan Nordic Body Map (Nbm) dan Rapid Upper Limb Assessment (Rula),” Jurnal TIN Universitas Tanjungpura, vol. 4, no. 2, 2020.
[6] N. M. Dewantari, “Risiko ergonomi pada pekerja pemilah sampah,” Journal Industrial Servicess, vol. 5, no. 2, pp. 194–198, 2020.
[7] R. Rahmahwati, “Perbaikan Tingkat Risiko Musculoskeletal Disorders Berdasarkan Pendekatan Nordic Body Map dan Rapid Upper Limb Assessment Pada Hasil Rancang Bangun Mesin Roasting Kopi Digital Otomatis,” Jurnal Rekayasa Sistem Industri, vol. 10, no. 2, pp. 191–200, 2021.
[8] J. E. S. Casym and D. N. Oktiara, “Analisis Postur Tubuh Pekerja Home Industry Pastel Menggunakan Analisis Rapid Upper Limb Assesment (RULA),” in Seminar Nasional Teknologi Komputer & Sains (SAINTEKS), 2020, pp. 631–635.
[9] A. F. Sari, P. Yuliarty, and A. Wibowo, “Analisis Tingkat Risiko Pekerja Pada Poin Kerja Header Pipe Dengan Metode Rapid Entire Body Assessment (REBA) dan Rapid Upper Limb Assessment (RULA),” Penelitian Dan Aplikasi Sistem Dan Teknik Industri, vol. 13, no. 3, pp. 285–297, 2020.
[10] L. McAtamney and E. N. Corlett, “RULA: a survey method for the investigation of work- related upper limb disorders,” Appl Ergon, vol. 24, no. 2, pp. 91–99, 1993.
[11] N. Susanti and A. N. Septi, “Penyuluhan Fisioterapi Pada Sikap Ergonomis Untuk Mengurangi Terjadinya Gangguan Musculoskeletal Disorders (Msds) Di Komunitas Keluarga Desa Kebojongan,” PENA ABDIMAS: Jurnal Pengabdian Masyarakat, vol. 2, no. 1, 2021.
[12] Y. Sianipar, “Berbagai manfaat dari upaya mempertahankan ergonomic pada berbagai posisi guna untuk keselamatan pasien,” 2020.
[13] Rahmahwati, R. (2021). Perbaikan Tingkat Risiko Musculoskeletal Disorders Ber-dasarkan Pendekatan Nordic Body Map dan Rapid Upper Limb Assessment Pada Hasil Rancang Bangun Mesin Roasting Kopi Digital Otomatis. Jurnal Rekayasa Sis-tem Industri, 10(2), 191–200.
[14] Rahmahwati, R. (2021). Perbaikan Tingkat Risiko Musculoskeletal Disorders Berdasarkan Pendekatan Nordic Body Map dan Rapid Upper Limb Assessment Pada Hasil Rancang Bangun Mesin Roasting Kopi Digital Otomatis. Jurnal Rekayasa Sistem Industri, 10(2), 191–200.
[15] Husni A.M (2023) Analisa Sikap Tubuh Operator Packing Pada Perakitan Wiring Harness Part No 32100-K2v-N410 Di Pt Piranti Dengan Metode Rap-id Upper Limb Assessment rula. Jurnal stt texmaco subang
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Raden Mohamad Sugengriadi, Deni Ahmad Taufik, Sandi Hermawan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
