Usulan Perbaikan Rancangan Meja Kerja Pada Proses Tekan Tarik Untuk Mengurangi Risiko Musculoskeletal Disorders (MSDS) Menggunakan Metode Rapid Entire Body Assessment (REBA) Di PT. Piranti Teknik Indonesia
Keywords:
Ergonomi, Operator, Tekan Tarik, REBA, Meja Kerja.Abstract
ABSTRACT
Operators of the tensile press section of PT Piranti Teknik Indonesia often complain of pain due to poor work postures and repetitive movements. to find out how dangerous work postures are. Data was collected through direct observation, interviews, filling out the Nordic Body Map questionnaire, and photo documentation of the rapid posture analysis method. The NBM results showed that the operators had individual scores with moderate risk levels of 53, 50, and 51, which required improvement. Meanwhile, the initial REBA analysis showed a score of 5 with a medium risk level, indicating that there was a medium risk that required additional investigation to reduce possible losses. The workbench was redesigned using CATIA PLM Express V5R20 software. The new workbench has a more ergonomic height and the pull press is adjustable. After the improvements were made, the REBA score dropped to 2 with a low risk level, showing a great improvement in ergonomics.
References
[1] Anthony, M. B. (2020). Analisis Postur Pekerja Pengelasan Di CV. XYZ dengan Metode Rapid Entire Body Assessment (REBA). 3(2), 110–119.
[2] Aprianto, B., Fajar Hidayatulloh, A., Zuchri, F. N., Seviana, I., & Amalia, R. (2021). FAKTOR RISIKO PENYEBAB MUSCULOSKELETAL DISORDERS (MSDs) PADA PEKERJA: A SYSTEMATIC REVIEW. 2(2).
[3] Ashary Aznam, S., Mardi Safitri, D., Dwi Anggraini, R., & Desain Sistem Ker-ja dan Ergonomi, L. (2017). ERGONOMI PARTISIPATIF UNTUK MENGURANGI PO-TENSI TERJADINYA WORK-RELATED MUSCULOSKELETAL DISORDERS. Jurnal Teknik Industri, 7(2).
[4] Dewi, N. F. (2020). IDENTIFIKASI RISIKO ERGONOMI DENGAN METODE NORDIC IDENTIFIKASI RISIKO ERGONOMI DENGAN METODE NORDIC BODY MAP TERHADAP PERAWAT POLI RS X BODY MAP TERHADAP PERAWAT POLI RS X. Da-lam Jurnal Sosial Humaniora Terapan (Vol. 2, Nomor 2).
[5] Fatimah. (2012). Penentuan Tingkat Resiko Kerja Dengan Menggunakan Score Reba. Dalam Industrial Engineering Journal Vo.1 No (Nomor 1).
[6] Fitria Sari, A., Yuliarty, P., & Andri Wibowo, dan. (2019). Analisis Tingkat Risiko Pekerja Pada Poin Kerja Header Pipe Dengan Metode Rapid Entire Body As-sessment (REBA) dan Rapid Upper Limb Assessment (RULA). XIII(3), 285–297.
[7] Hignett, S., & McAtamney, L. (2000). Rapid Entire Body Assessment (REBA). Applied Ergonomics, 31(2), 201–205. https://doi.org/10.1016/S0003-6870(99)00039-3
[8] Hutabarat, Y. (2017). DASAR-DASAR PENGETAHUAN ERGONOMI.
[9] Idkhan, M., Rera Baharuddin, F., & Palerangi, A. M. (2021). ANALISIS ER-GONOMI. https://www.freepik.com/free-
[10] Juliana, N., Agus Hindarto Wibowo, Mk., Anggi Setiorini, dr, dr Noverial, A., Vidya Avianti Hadju, S., Kartinasari Ayuhikmatin Sekarjati, M., Ayuningtias Mahdang, P., Nur Cahyani Amaliawati Rahmat, M., & dr Kinik Darsono, Mk. (2023). ERGONO-MI DAN FAAL KERJA PENERBIT CV.EUREKA MEDIA AKSARA.
[11] Rahadian, Y., Arcibal, G., & Iftadi, I. (2017). ANALISIS RISIKO POSTUR KERJA DI CV. A CLASS SURAKARTA.
[12] Rahdiana, N. (2017). IDENTIFIKASI RISIKO ERGONOMI OPERATOR MESIN POTONG GUILLOTINE DENGAN METODE NORDIC BODY MAP (STUDI KASUS DI PT. XZY). 02(01).
[13] Restuputri, D. P. (2017). Metode REBA Untuk Pencegahan Musculoskeletal Disorder Tenaga Kerja. Jurnal Teknik Industri, 18(1), 19–28. https://doi.org/10.22219/jtiumm.vol18.no1.19-28
[14] Sepfrian, B., Waluyono, G. F., Saputra, F. R., & Novira, D. (2023). KREA-TIVASI JOURNAL OF COMMUNITY EMPOWERMENT.
[15] Sugengriadi, R. M., Taufik, D. A., & Matin, H. A. (2024). Analisa Sikap Tubuh Operator Packing Pada Perakitan Wiring Harness Part No. 32100-K2V-N410 Di PT Piranti Dengan Metode Rapid Upper Limb Assessment (RULA) (Vol. 2, Nomor 2).
[16] Sugengriadi, R. M., Taufik, D. A., & Munisah, S. (2024). Analisis Tingkat Risiko Cedera Pekerja Menggunakan Metode Rapid Entire Body Assisment Bagian Warehouse Pada PT Piranti (Vol. 2, Nomor 2).
[17] Sunarto, & Santoso WN, H. (2020). buku-saku-analisis-pareto.
[18] Tamala, A. (2020). PENGUKURAN KELUHAN MUSCULOSKELETAL DISOR-DERS (MSDS) PADA PEKERJA PENGOLAH IKAN MENGGUNAKAN NORDIC BODY MAP (NBM) DAN RAPID UPPER LIMB ASSESSMENT (RULA).
[19] TARWAKA. (2019). ERGONOMI INDUSTRI : DASAR DASAR PENGETAHUAN ERGONOMI DAN APLIKASI DI TEMPAT KERJA (Revisi Edisi II). HARAPAN PRESS.
[20] Yemima, O., Nohe, D. A., & Novia Nasution, Y. (2014). Penerapan Peta Kendali Demerit dan Diagram Pareto Pada Pengontrolan Kualitas Produksi (Studi Ka-sus: Produksi Botol Sosro di PT. X Surabaya). Jurnal EKSPONENSIAL, 5(2).
[21] Yustika, A., Fakultas, S., Masyarakat, K., Dahlan, A., Yogyakarta, J., & Ten-gah, I. (2022). MUSCULOSKELETAL DISORDERS (Msds) PADA PEKERJA DI IN-STALASI GIZI RUMAH SAKIT JIWA GRHASIA. Dalam Jurnal Lentera Kesehatan Masyarakat (Vol. 1, Nomor 3). https://jurnalkesmas.co.id
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Raden Mohamad Sugengriadi, Deni Ahmad Taufik, Irvan Fadillah
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
